Welcome to my linocut printmaking blog. I’ve been writing since 2011 so if you’d like to browse or keyword search my archives you can take a look…thanks!
Ink | Paper | Press | Shirts (Fabric) | Tools
Made some of these Lake Tahoe linocut prints today...good to be back at the press after too long.
A video posted by Boarding All Rows (@boardingallrows) on Jan 26, 2016 at 1:11pm PST
Last month, I took the same block and printed a long-sleeve t-shirt for myself.
Lake Tahoe Block Printed T-Shirt
"...at last the Lake burst upon us—a noble sheet of blue water lifted six thousand three hundred feet above the level of the sea, and walled in by a rim of snow-clad mountain peaks that towered aloft full three thousand feet higher still!" - Mark Twain, from Roughing It.
"A Noble Sheet of Blue Water" - Linocut Print
Medium: Seven-Color, Linoleum Block Print
Titled: "A Noble Sheet of Blue Water"
Edition Size: 9
Measures: 13"x19"
Available for purchase at Etsy.com
It feels great to have finally finished this print, though it wasn't without its challenges! I've included some work in progress shots below and the first shows the finished carving for the first layer of colors of the print. I laid out my colors of ink, which I mixed on glass for a blue roll on the bottom (water), with a separate yellow roll on top (sky). The top roll is a "rainbow" roll with two tones of yellow, creating a color gradient, which adds a little more time to the printing process but creates a cool effect. I made a little template, which is above the linoleum in the photo, to help keep ink off the middle area of the block, while I rolled ink on the linoleum with the two brayers (rollers).
The wooden device on the right is a homemade registration jig that I put on the etching press to make sure the paper and lino block are lined up correctly, so that each subsequent color layer is printed exactly on the layer below it as the printing process continues. Most importantly, there's coffee.
Lake Tahoe Linoleum Block Print Work in Progress
Next, is a shot of the Lake Tahoe print after the first four colors. I used the reduction method for the second layers on the sky and water. Now, I'm ready to carve the mountains on the second block of linoleum.
The sky and water made using the reduction method
This is how the mountain relief print turned out - it's now drying for a couple weeks. It combines the use of both wood and lino blocks and I started it last summer but put it aside for a while. I decided to print the actual mountain using a gradation from dark to light. If you're curious about how the project started, you might check out the original post.
